When something goes wrong with the power in a Chantilly home or commercial space, the call needs to go somewhere that can actually scope the job, confirm a price, and get out to the property. That is what we do. Calls are answered here, and the work gets scheduled properly. We are available every day from 6:30 AM to 10:00 PM, which means you are not waiting until the next business day to find out when someone can come.
We handle the full range of residential and commercial electrical work: repairs and troubleshooting, panel upgrades, outlet and lighting installation, wiring, dedicated circuits, and everything in between. You get the price confirmed on the phone before anything is scheduled.
Call (571) 619-9356 to get started, and reach out to us when you need the job handled right.
A town of this size carries a mix of housing types and ages, and the electrical calls that come out of that mix tend to be specific. Newer construction sometimes has panels that were sized just barely for the original load, and additions or renovations push them past capacity. Older homes carry wiring that was installed before arc-fault protection was a requirement and before the modern appliance load was imagined. Here is what we handle most.
These appliances run on 240-volt dedicated circuits, and the situation that leads to the call is usually the same: an appliance is being replaced or installed for the first time, and the existing wiring either does not exist or does not match what the new unit needs. We run the circuit from the panel, size the breaker to the load, and confirm the panel has room before any wire is pulled. If it does not, that conversation happens on the phone before the visit is scheduled.
Outdoor wiring involves weatherproof connections, proper grounding, and circuits rated for the exposure. Security lights at entry points, landscape lighting along a path or driveway, and motion-sensor fixtures at a garage or outbuilding all involve running a circuit to a location that may not have had one before. We wire it correctly for outdoor use rather than extending an indoor circuit that was not designed for it.
The situation that leads to this call is almost always the same: a ceiling box that was installed for a light fixture, not a fan. A standard fixture box is not rated to handle the weight and motion load of a ceiling fan. We swap the box for a fan-rated one, confirm the wiring is correct for the switch configuration, and handle three-way setups where the fan and light need to be controlled separately.
A panel where half the breakers are unlabeled or mislabeled is a real problem when something goes wrong. It slows down every repair, makes it harder to isolate a circuit safely, and creates risk when someone resets the wrong breaker. We trace and label circuits correctly, which also turns up wiring issues that were not visible from the outside. This is work that pays off on every future visit to the property.
A refrigerator, dishwasher, microwave, or sump pump running on a shared circuit causes nuisance tripping and puts steady stress on the wiring. A dedicated circuit gives each appliance a direct line from the panel with nothing else drawing from it. We also run dedicated circuits for workshops, garages, and outdoor spaces where the load is variable and unpredictable. Load calculations are part of this work, not an afterthought.
Some jobs require a full panel shutdown. Others only need one circuit isolated. Which one applies depends on what is being done and where it sits in the system.
A single outlet replacement or a new circuit run to one room typically only takes that circuit off. A panel replacement, a service-entrance upgrade, or a rewiring project that touches the main feed requires the whole panel to go down for part of the job. We confirm which applies when we scope the job on the phone.
For anyone working from home, we talk through the timing before the visit. For a business that needs to stay open, we plan the shutdown around the hours and the areas of the building that can be isolated without affecting operations. The goal is to keep the disruption narrow and predictable.
Rental properties in Chantilly involve a layer of coordination that owner-occupied homes do not. The person who books the work is often not the person who lives in the unit, and the person who needs to be home for access is often not the one who gets the invoice.
We work through that without making it complicated. The landlord or property manager books the job and gets the price confirmed on the phone. Access is arranged directly with the tenant, and we confirm that arrangement before the visit is scheduled so no one is waiting around. After the job is done, the record of what was done and what was found goes to whoever needs it for their files.
If a unit has older wiring, a panel that has not been touched in years, or GFCI and AFCI protection that was never installed, a safety inspection before a new tenancy is a straightforward way to know what is there. We document what we find and walk through it clearly.
Pricing and Scope
The price is confirmed on the phone before anything is scheduled. To get there, we talk through what the symptom is, what the job involves, and what the visit will cover. That is enough to give you a rate for most jobs.
What moves a quote is what the job actually turns out to involve once we are on-site. The fault location, what has to be opened up to reach it, and whether the existing panel or circuit can carry the change are the things that can shift the scope. If that happens, the new scope gets explained before the work continues. You are not handed a different number at the end without a conversation.
There is no charge to call and ask. You get a plain answer about what the job costs and what it covers.
Call (571) 619-9356 and we will talk through it.
We know schedules shift, so we keep booking flexible. Appointments are arranged on the call, and we work around the hours that suit the property. For a home where someone is working remotely, we plan the shutdown so it falls at a time that causes the least disruption. For a business, we confirm which areas can be taken off without affecting operations and schedule accordingly.
When a problem will not keep, we take short-notice calls. Ask what the schedule allows when you phone, and we will tell you what is open. We confirm what is available before anything is booked, so there is no ambiguity about when to expect us.
The work is done locally. We'll get the job wired and finished.
In a multi-unit building, the panel for an individual unit is often in a hallway, a utility room, or a shared electrical closet rather than inside the unit itself. Access to it sometimes requires coordinating with building management, and that is worth knowing before the visit is scheduled.
Some parts of the electrical system in a condo or apartment are shared: the service entrance, the meter bank, and the main distribution panel that feeds the individual units. Those are typically the building's responsibility, not the tenant's. What sits inside the unit, from the individual panel or breaker box outward, is what we work on.
If you are not sure where the line falls between your responsibility and the building's, call us and describe what you are seeing. We can usually tell you on the phone whether the fault is likely inside the unit or upstream of it, which tells you whether to call us or the building manager first.
We work throughout Chantilly and the surrounding communities in Fairfax County. Nearby areas we serve regularly include Sully Square, Greenbriar, Navy, Franklin Farm, and Floris. If your property is in or around any of these areas, we cover it.
Coverage is the same across the area. The same work, the same pricing process, the same hours. What the work involves is covered on the services page.
Call (571) 619-9356 and confirm your address if you are not sure.
In most cases, yes. If the wiring in the area being worked on is in acceptable condition and the fault or upgrade is contained, we address it without requiring the whole property to be rewired. A full rewire becomes necessary when the existing wiring is unsafe throughout or when the scope of the renovation makes partial work impractical.
We discuss the scope of the shutdown on the call before scheduling. If the job requires power to be off for a period, we identify which circuits will be affected and for how long, so you can plan around it. For home office equipment, a brief shutdown is typically the main concern, and we try to schedule around it where the work allows.
Panel labeling, GFCI and AFCI upgrades, and dedicated circuit work for appliances are the calls we get most from landlords and property managers in the area. Older units that have not had electrical work done in years often need arc-fault and ground-fault protection added to meet current requirements. We document what we find so the landlord has a clear record after the visit.
We work from what is visible and testable: the panel, accessible junction boxes, and the circuits themselves. Tracing circuits without drawings takes longer, but it is standard practice in older properties. We tell you upfront that the diagnostic may take more time and confirm the scope before we start.
It often does. Homes built before arc-fault protection was required may not have AFCI breakers in the rooms where code now calls for them. Older panels may be undersized for the loads a modern household puts on them, and wiring that has not been inspected in years can have connection issues that are not visible from the outside. An electrical safety inspection is a practical starting point if the home has not had electrical work done recently.
Yes. We cover those areas along with Chantilly and the surrounding communities in Fairfax County.
Call (571) 619-9356, describe the job, and confirm your address.
We will scope it on the phone and get it on the schedule.
Outdoor outlets require weatherproof covers rated for use in wet locations, GFCI protection, and boxes designed for exterior installation. A cover that is only rated for damp locations is not adequate where the outlet is exposed to direct rain. We install the correct components for the specific location and confirm the GFCI protection is working before the job is closed.
Time-of-day tripping usually points to a load issue rather than a wiring fault. If the breaker trips when a specific appliance runs, or when multiple loads are on at the same time, the circuit is being pushed past its rating under those conditions. We trace which loads are on the circuit and whether the circuit is correctly sized for the combined draw.
When you call, you reach someone who knows the trade and can scope the job on the phone. You get a price before anything is scheduled. We show up, we explain what we find, and we do not proceed past the agreed scope without a conversation. You schedule it. We power it. Simple as that.
Call (571) 619-9356 for a quote on electrical work in Chantilly. We are available every day from 6:30 AM to 10:00 PM.
Wiring and panel work covers these nearby towns as well: Franklin Farm, South Riding, McNair, Sudley.
See the whole of our coverage area.
Below is a quick look at the electrical work we handle for homes and businesses throughout Chantilly and Fairfax County. Each row covers what the service includes, who it fits best, and a practical note worth knowing before you call. If you have questions about a specific job, the scope and price are confirmed on the phone before anything is scheduled.
| Type of Work | Scope of Work | Best For | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | Load calculation before panel workPanel replacement and service-entrance updateSubpanel installationMeter and weatherhead work where needed | Homes on 100-amp service adding EV chargers, appliances, or square footage | Many Chantilly homes were built on 100-amp service. A load calculation tells us exactly what the new panel needs to handle before any work starts. |
| Dedicated Appliance Circuits | Kitchen and laundry appliance circuitsElectric range and dishwasher wiring240V circuits for dryers and ranges | Homeowners adding or replacing high-draw appliances on shared circuits | Running a major appliance on a shared circuit causes nuisance tripping and creates risk over time. A dedicated circuit gives it a direct line from the panel. |
| Older-Home Rewiring | Knob-and-tube and aluminum wiring assessmentPartial or full rewiringCode-compliance updates for sales or inspections | Owners of older Chantilly homes with wiring that predates current code | Aluminum branch-circuit wiring and knob-and-tube both present risks that modern wiring does not. A safety inspection tells you what you are working with before rewiring decisions are made. |
Call (571) 619-9356 between 6:30 AM and 10:00 PM any day of the week and we will scope the job on the phone so you know exactly what it involves before anything is scheduled.
(571) 619-9356